Easy Steps To Create A Mechanical CAD Model

In this complex era of heavy mechanical manufacturing and designing, one of the greatest things which are taking the whole industry by its storm is the 3d cad models. No matter how small or giant the design is, the engineer will leverage the potential of modern designing techniques to accomplish the idea into a reality.

Just because of these simple techniques, anyone can craft breathtaking mechanical cad drawing without hustling a much. In this article, we will explain to you in easy steps how to create a mechanical CAD model of your dream design.

Mechanical CAD Model

  1. Complete your 2D design first:

For creating amazing 3d CAD designs, first, prepare your complete 2d design. Once you figure out your concept and you exactly know what you want to create, everything is easy then. Just take out your sheet and pencil and draw your imagination over it. This will help you a lot.

  1. Open Default-mm File and start sketching:

Go home, open “default-mm” file and from the properties tab, select Materials property to get started. Select the XY-Plane in the design explorer, start your sketching with the 2 Corner Rectangle and so on.

  1. Add height and width to your design:

Once you place your basic design, it’s time to go and add accurate height and width to your design. Once you provide height and width to the respective edges, you can save the design. In doubt, you can also check out various videos available on the Internet posted by experienced Drafting contractors.

  1. Rough Sketch and Extrude cutting:

It’s time to again go to the sketch mode and open the toolbar to draw the rough sketch of the design in the 3d mode. Once you are done with the design, move forward to the extrude cutting process. Select the rough cut tool and choose the complete design and click OK, this will cut all the extra design edges which are not needed. Don’t worry if you are doing something important and you got stuck in between, you can always hire 3d cad drafter on contract which will help you out.

  1. Final touch and colour filling:

You are almost there, you just need to give final touches to your design including adding dimensions, setting the angles and so on. After that, select areas one by one and start colouring them, filling colours to your design will be an easy task.

We hope this short guide will help you out in starting your first CAD model designing. And if you are looking for the best 3d cad designing hubs in Melbourne, there are many popular companies from which you can easily hire CAD engineer in Australia for your work.



Leave a Reply

This website uses cookies and asks your personal data to enhance your browsing experience.