3D Scanning Services in Melbourne

HomepageIndustries & applicationsFAQServices

What is 3D scanning?.

3D scanning service is the procedure of changing over physical items into exact computerized models & empowers you to rapidly and precisely catch your object’s shape and geometries. This procedure supplies you with a complete computerized representation of your part to be utilized for figuring out, quality examination or anytime of a commonplace assembling cycle.

3D printing has made it conceivable to add to 3D articles from 2D plans. Presently, with 3D filtering administrations, the opposite procedure is additionally conceivable as 3D items can be examined to create their computerized plans. At Zeal Cad, we are focused on giving exact advanced models with the goal that they can figure out their items. We make utilization of laser scanners and organized light scanners alongside different instruments to precisely catch shape and geometry of the item. Our 3D checking administrations Melbourne Australia are composed in a manner that customers are furnished with astounding computerized models at sensible rates. We give 3D examining administrations on location as well.

ZEAL CAD gives 3D scanning services by utilizing structured light scanners and laser scanners. Energy CAD uses the Range 7 and Vivid 9i 3D laser scanners and additionally a mixed bag of different apparatuses for information gathering. Particular programming projects are utilized to adjust the distinctive point mists together. The last information set can then be post prepared to the sought document position for the client’s application.

We use cutting edge non-contact, laser based equipment and programming examining innovation that creates very precise sweep information. The blend of driving edge innovation and low overhead permits us to offer superb 3D filtering and advanced figuring out administrations at a much lower cost.

Figuring out, dimensional investigation, and 3D scanning in Melbourne are performed either on location or at our office.

We check the items up to 200 cubic centimeters.

We likewise give the 3D printed parts from post handled output information.

What is 3D scanning? -How much time it takes for 3D scanning and final desired output?

Scan process usually takes 2-3 hrs for precise 3d scanning then we post process on raw data (points cloud) to make fully parametric 3d model which can be modified later. So considering scanning and post processing we provide the output to you in less than 5 hrs. (Sometimes if we are busy in previous work or having multiple orders then we will make sure that your work will be completed & delivered to you in 24 hrs.)

3D Scanning Services

Fig: Cleaned Scan Data

3D Scanning Services Melbourne

Fig: Scan data to STL

Best 3D Scanning Services

Fig: Scan data to STL

Why use 3D scanning?

3D scanning services can be used in almost any engineering process and setting, and as a result there are many different ways that the data obtained can benefit you. It makes digital copy of physical part.3D scanning is useful in reverse Engineering or quality inspection, Rapid Prototyping, Computer Aided Engineering (CAE) & Digital archiving.

Benefits of 3D scanning:

  • Rapid data capture
  • Shortened production cycles
  • Increased manufacturing efficiency
  • Improved product quality

Services we provide:

  • High-accuracy 3D scanning
  • Onsite 3D scanning of large objects
  • Face and body scanning
  • Reverse engineering to native CAD formats
  • Dimensional inspection
  • Rapid prototyping

From 3D scanning we provide different file formats as an output:

File Formats We Deliver:

  • Native, fully-parametric 3D CAD: SolidWorks, ProE Wildfire, Siemens NX, Autodesk Inventor
  • Neutral CAD: .x_t, .x_b, .igs, .stp, .sat
  • Polygon models: .stl, .obj, .3ds, .wrl, .dxf, .collada
  • Inspection reports: .pdf, .xls

MANUFACTURING:

3D scanning is widely used in manufacturing industry.

Main areas in Manufacturing industry are


Die & Mould Design and Modifications:

3D Scanning helps in designing dies and mould. 3D Scanning is also used to make modifications in existing die or moulds.


INSPECTION:

3D scanning is used to check accuracy of first manufactured product.First manufactured part is 3D scanned and scanned data is compared to CAD data for any possible error.

CONSUMER PRODUCTS:

3D Scanning reduces the time involved in creating new CAD data for new product. Instead of making new CAD data for new product, 3D scanning allows to scan existing product and modify it later, so 3D scanning reduces product design time greatly.

OTHER:

3D scanning helps to preserve historical objects into digital form.

It is used to digitize Sculptures, art & architectural work.

3D scanning is now growing its applications in healthcare.

1. What is 3D scanner?

A 3D scanner is a device that analyzes a real-world object or environment to collect data on its shape and appearance.

2. What is 3D scanning?

3D scanning is the process of converting physical objects into precise digital 3D models.

3. How 3D scanning works?

3D scanning is done by device called 3D scanner. The 3D laser scanners are differentiated by how they take measurements of physical objects.

Some major 3d scanning techniques are described below:

a) 3D Laser Scanning: In 3D laser scanners laser is used to measure real world objects. Different methods used are

  • Laser triangulation is accomplished by projecting a laser line or point onto an object and then capturing its reflection with a sensor located at a known distance from the laser’s source. The resulting reflection angle can be interpreted to yield 3D measurements of the part.
  • Time of flight laser scanners emit pulse of laser light which is reflected back from object. This reflected laser is detected by sensor and time between laser emission and detection is calculated. This time is compared with known laser light speed and distance of object is calculated.
  • Phase shift laser scanners works similar to time of flight scanners. In this phase shift of reflected laser is compared to standard laser phase.

b) White Light Scanning (structured light scanning): A white light scanner is a camera and scanner combination that creates a 3D scan of an object, primarily by using white light. The white light scanner has to take many pictures to correctly assemble a 3D model, and the scanner may be manual or automatic. A fringe pattern, or a black-and-white line pattern, is used to ensure accuracy, to add contrast and to measure the object during the scan. Before pictures can be taken, dots and points are manually added to the object so the computer can correctly compile the object in 3D space.

4. What types of 3D scanners you use?

ZEAL CAD provides 3D scanning services using non-contact structured light scanners and laser scanners. Zeal CAD utilizes the Range 7 and Vivid 9i 3D laser as well as a variety of other tools for data collection.
Specialized softwares are used to align or register the different point clouds together. The final data set can then be post processed to the desired file format for the customers application.

5. What is maximum size of object you can scan?

We scan the objects up to 200 cubic centimeters.

6. How much time it takes for 3D scanning and final desired output?

Scan process usually takes 2-3 hrs. for precise 3d scanning then we post process on raw data (points cloud) to make fully parametric 3d model which can be modified later. So considering scanning and post processing we provide the output to you in less than 5 hrs. (Sometimes if we are busy in previous work or having multiple orders then we will make sure that your work will be completed & delivered to you in 24 hrs.)

7. Will you do 3D scanning onsite?

Yes, if parts are too big to transport to our facility then we can scan the parts onsite.

8. What file formats you provide as an output?

File Formats We Deliver:

  • Native, fully-parametric 3D CAD: SolidWorks, ProE Wildfire, Siemens NX, Autodesk Inventor
  • Neutral CAD: .x_t, .x_b, .igs, .stp, .sat
  • Polygon models: .stl, .obj, .3ds, .wrl, .dxf, .collada
  • Inspection reports: .pdf, .xls
9. What are the benefits of 3D scanning?
  • instant 3D image
  • time saving
  • detecting areas of poor product performance
  • enhancing a products design
  • accurate measurements of an object
  • offers cost benefits for metal fabricating and sheet-metal forming
  • provides documentation to evaluate a product for quality inspection and re-design
10. How can I 3D print my scanned part? Can you provide me 3D printed part?

Yes. We provide 3D printing services. For more information please visit our 3D printing website.

http://zeal3dprinting.com.au /

  • 3D CAD services

    If you want fully parametric 3D CAD model of your scan data then let the 3D experts help! Zeal CAD provides fully parametric 3D CAD models for your scan data in SolidWorks, ProE Wildfire, Siemens NX, Autodesk Inventor formats.

  • 3D Printing Services

    Zeal 3D printing provides 3D printing service. We can 3D print your scan data or 3D model in different materials and in best quality possible.
    Please visit our 3D printing website for more information http://zeal3dprinting.com.au/

  • 3D Scanning Services
    • 3D Laser Scanning
    • Inspection
    • Reverse Engineering